Surge arrester for 4-conductor power supply systems (L1, L2, L3, PEN), consisting of a base element with remote indication contact and protective connectors, for mounting on NS 35.

Technical specifications
Accessory group Shaft adaptation
Accessory family Shaft couplings
Description Bellows coupling, shaft diameter 6 mm / 10 mm, maximum shaft offset: radial ± 0.25 mm, axial ± 0.4 mm, angular +/- 4°; max. speed 10,000 rpm, –30 °C to +120 °C, max. torque 120 Ncm; material: stainless steel bellows, aluminum hub

IoT controller and gateway, dual
core CPU, 2 Ethernet 10/100, 1
Ethernet 10/100/1000, 2 USB, 1
serial, 2 plug-in, JMobile runtime

3-way signal conditioner with plug-in connection technology and calibrated measuring range changeover for the electrical isolation of unipolar and bipolar analog signals. Input/output configurable via DIP switch. Screw connection technology, standard configuration.

Data connector, PROFINET CAT5 (100 Mbps), 4-position, shielded, Plug straight M12, D, Push-lock spring connection, knurl material: Zinc die-cast, nickel-plated, external cable diameter 4 mm ... 8 mm

Axioline Smart Elements, Slot cover, degree of protection: IP20

Ethernet switch, 24 Ethernet ports on the front in RJ45 format, automatic detection of 10 or 100 Mbps data transmission rate, coupling of network segments with different transmission speeds, auto crossing function, installs in 19-in. (482 mm) rack

Narrow Ethernet switch, wide temperature range, twelve RJ45 ports with 10/100 Mbps on all ports, two SFP ports with 100/1000 Mbps, automatic data transmission speed detection, autocrossing function, and QoS

The small form-factor plug-in module provides a fiber optic interface with a data transmission speed of 100 Mbps with a wavelength of 1310 nm (long).

The small form-factor plug-in module provides a fiber optic interface with a data transmission speed of 100 Mbps with a wavelength of 1310 nm (long

Relay retaining bracket, wire model, suitable for ECOR-2... relay base when used with REL-IR-BL... relays

untime license for Visu+ including alarm dispatcher function where the I/O data and variables in scripting are limited to 2048 bytes.

Runtime license for Visu+ including alarm dispatcher function where the I/O data and variables in scripting are limited to 4096 bytes.

Features
Functional principle Optical detection principle
Dimensions (W x H x D) 10 mm x 25 mm x 64.3 mm
Housing design Fork shaped
Fork width 3 mm
Fork depth 42 mm
Minimum detectable object (MDO) Gap between Labels / Size of labels: 2 mm 1)
Label detection ✔
Light source LED, infrared, Infrared light
Adjustment

Plus/minus button (Teach-in, sensitivity, light/dark switching)

Cable (Teach-in dynamic)
Teach-in mode

2-point teach-in

Teach-in dynamic
1) Depends on the label thickness.

Mechanics/electronics
Supply voltage 10 V DC ... 30 V DC 1)
Ripple < 10 % 2)
Current consumption 20 mA 3)
Switching frequency 10 kHz 4)
Response time 50 µs 5)
Stability of response time ± 20 µs
Jitter 40 µs
Switching output PNP
Switching output (voltage) PNP: HIGH = UV ≤ 2 V / LOW approx. 0 V
Switching mode Light/dark switching
Output current Imax. 100 mA
Input, teach-in (ET)

PNP

Teach: U > 5 V ... < UV

Run: U < 4 V
Initialization time 20 ms
Connection type Male connector M8, 4-pin
Protection class III
Circuit protection

UV connections, reverse polarity protected

Output Q short-circuit protected

Interference pulse suppression
Enclosure rating IP65
Weight Approx. 36 g
Housing material Plastic, PA (glass-fiber reinforced)
1) Limit values, reverse-polarity protected, operation in short-circuit protected network: max. 8 A.
2) May not exceed or fall below Uv tolerances.
3) Without load.
4) With light/dark ratio 1:1.
5) Signal transit time with resistive load.

Ambient data
Ambient operating temperature –20 °C ... +60 °C 1)
Ambient temperature, storage –30 °C ... +80 °C
Ambient light immunity ≤ 10,000 lx
Shock load According to EN 60068-2-27
UL File No. NRKH.E191603
1) Do not bend below 0 °C.

Features
Functional principle Photoelectric retro-reflective sensor
Functional principle detail Dual lens
Sensing range max. ≤ 6 m 1)
Sensing range ≤ 5 m 1)
Polarisation filters Yes
Emitted beam
Light source PinPoint LED 2)
Type of light Visible red light
Light spot size (distance) Ø 8 mm (350 mm)
Key LED figures
Wave length 650 nm
Adjustment None
1) Reflector PL80A.
2) Average service life: 100,000 h at TU = +25 °C.

Safety-related parameters
MTTFD 2,084 years
DCavg 0 %
TM (mission time) 20 years

Electrical data
Supply voltage UB 10 V DC ... 30 V DC 1)
Ripple ± 10 % 2)
Current consumption 30 mA 3)
Protection class III
Digital output
Type NPN
Signal voltage NPN HIGH/LOW Approx. VS / ≤ 3 V
Output current Imax. ≤ 100 mA 4)
Response time < 625 µs 5)
Switching frequency 1,000 Hz 6)
Switching mode Light/dark switching
Switching mode selector Selectable via light/dark selector
Circuit protection

A 7)

B 8)

D 9)
1) Limit values when operated in short-circuit protected network: max. 8 A.
2) May not exceed or fall below Uv tolerances.
3) Without load.
4) At Uv > 24 V, IA max. = 50 mA.
5) Signal transit time with resistive load.
6) With light/dark ratio 1:1.
7) A = VS connections reverse-polarity protected.
8) B = inputs and output reverse-polarity protected.
9) D = outputs overcurrent and short-circuit protected.

Mechanical data
Housing Rectangular
Dimensions (W x H x D) 12 mm x 31.5 mm x 21 mm
Connection Male connector M8, 4-pin
Material
Housing Plastic, ABS/PC
Front screen Plastic, PMMA
Weight 20 g

Ambient data
Enclosure rating IP67
Ambient operating temperature –25 °C ... +55 °C 1)
Ambient temperature, storage –40 °C ... +70 °C
UL File No. NRKH.E348498 & NRKH7.E348498
1) Temperature stability following adjustment +/-10 °C.

Features
Number of positive action N/C contacts 1
Number of N/O contacts 1
Retaining force ≤ 30 N
Actuation frequency ≤ 7,200 /h
Actuation directions 3
Approach speed ≤ 10 m/min

Safety-related parameters
B10d parameter 2 x 106 switching cycles (with small load)
Type Type 2 (EN ISO 14119)
Actuator coding level Low coding level (EN ISO 14119)
Safe state in the event of a fault The switch has no internal fault detection and is unable to assume a safe state in the event of a fault. Fault detection is performed by the connected safety-related logic unit.

Functions
Safe series connection None, only individual wiring (with diagnostics)

Interfaces
Connection type Cable gland, 3 x M20
Conductor cross section ≤ 1.5 mm²

Electrical data
Switching principle Slow action switching element
Usage category AC-15/DC-13 (IEC 60947-5-1)
Rated operating current (voltage)

3 A (240 V AC)

2 A (24 V DC)
Rated insulation voltage Ui 240 V
Rated impulse withstand voltage Uimp 2,500 V
Short-circuit protection T10/10A
Switching voltage ≥ 5 V DC
Switching current (switching voltage) ≥ 5 mA (5 V DC)

Mechanical data
Weight 0.14 kg
Housing material Glass-fiber reinforced polybutylene terephthalate (PBT)
Mechanical life 1 x 106 switching cycles

Ambient data
Enclosure rating IP67 (IEC 60529)
Ambient operating temperature –20 °C ... +80 °C
Storage temperature

Technical specifications
Accessory group Actuators
Design Straight
Actuation option Rigid
Min. door radius ≥ 175 mm

Model 10W30XPPC13X0
Dimension 382.2(W)x251.4(H)x51.7(D)mm
Cut Out Size (W x H) 370.5x240.mm
Panel size/resolution 15.6" 16:9 1920x1080
Luminance 450 cd/m² LED
Touch screen 10 Point Capacitive
CPU Onboard 11th Generation Intel
Core i5-1115G4E
Memory 8 GB DDR3L
CFast socket One External CFast socket
HDD Drive Bay 512 GB SSD
I/O port
Isolation 2x RS232/422/485 by BIOS
setting, 2xGbE, 1xVGA, 1xLine-out,
2xUSB 2.0, 1xUSB 3.0, PS2 KB/MS
Extension 2xmini-PCIe
Mounting Panel/Wall/Stand/VESA 100x100mm
Embedded Image (QVL,
Optional) Windows 10 64 bit
Operating Temp. 0°C to 50°C
Vibration 1Grms with HDD by IEC68 2-
64@SINE
Shock 20G with HDD by IEC68 2-27@wall
mount, half sine
Weight 4.3Kgs