Housing Cylindrical thread design
Housing Standard design
Thread size M5 x 0.5
Diameter Ø 5 mm
Sensing range Sn 1.5 mm
Safe sensing range Sa 1.215 mm
Installation type Flush
Switching frequency 3,000 Hz
Connection type Connector M8, 3-pin
Switching output PNP
Output function NO
Electrical wiring DC 3-wire
Enclosure rating IP67 1)

Sensing range max.: 20 mm ... 2,000 mm
Sensor principle: Photoelectric proximity sensor
Detection principle: Energetic
Switching output: PNP
Switching mode: Light/dark switching
Connection type: Male connector M12, 4-pin
Light source: LED
Adjustment: Potentiometer

Performance
Pulses per revolution 2,500 1)
Measuring step 90° electric/pulses per revolution
Measuring step deviation at non binary number of lines ± 0.01°
Error limits ± 0.05°
Interfaces
Communication interface Incremental
Communication Interface detail TTL / RS-422
Number of signal channels 6-channel
Initialization time 40 ms
Output frequency ≤ 600 kHz
Load current ≤ 30 mA
Operating current 40 mA (without load)
Electrical data
Connection type Male connector, M23, 12-pin, radial
Supply voltage 4.5 ... 5.5 V
Reference signal, number 1
Reference signal, position 90°, electric, logically gated with A and B
Short-circuit protection of the outputs ✔ 1)
MTTFd: mean time to dangerous failure 300 years (EN ISO 13849-1) 2)

Accessory family Reflective tape
Description Self-adhesive, roll
Mounting system type Self-adhesive
Ambient operating temperature –20 °C ... +60 °C
Dimensions 50 mm x 22.8 m

The GW MODBUS TCP/RTU... gateway converts serial based Modbus RTU (or ASCII) to Modbus TCP. Supports serial client or server devices. Includes two RJ45 ports and four D-SUB 9 ports.

Dimensions (W x H x D): 12 mm x 31.5 mm x 21 mm
Sensing distance: 12.5 mm
Sensing distance tolerance: ± 3 mm
Housing design (light emission): Rectangular
Light source: LED, White 1)
Light spot size: Ø 2 mm
Light spot direction: Vertical 2)
Adjustment: Teach-in button
Teach-in mode: 2-point teach-in static/dynamic + proximity to mark
Output function: Light/dark switching

Dimensions (W x H x D): 12 mm x 31.5 mm x 21 mm
Sensing distance: 12.5 mm
Sensing distance tolerance: ± 3 mm
Housing design (light emission): Rectangular
Light source: LED, White 1)
Light spot size: Ø 2 mm
Light spot direction: Vertical 2)
Adjustment: Teach-in button
Teach-in mode: 2-point teach-in static/dynamic + proximity to mark
Output function: Light/dark switching

Performance
Pulses per revolution 1,000 1)
Measuring step 90° electric/pulses per revolution
Measuring step deviation at non binary number of lines ± 0.2°
Error limits ± 0.3°
1) See maximum revolution range.

Interfaces
Communication interface Incremental
Communication Interface detail TTL / RS-422
Number of signal channels 6-channel
Initialization time 40 ms
Output frequency ≤ 300 kHz
Load current ≤ 30 mA
Power consumption ≤ 0.5 W (without load)

Electrical data
Connection type Cable, 8-wire, universal, 1.5 m 1)
Supply voltage 10 ... 32 V
Reference signal, number 1
Reference signal, position 90°, electric, logically gated with A and B
Reverse polarity protection ✔
Short-circuit protection of the outputs ✔ 2)
MTTFd: mean time to dangerous failure 300 years (EN ISO 13849-1) 3)

D-SUB connector, 9-pos. female connector, axial version with two cable entries, bus system: CAN, CANopen, SafetyBUS p; pin assignment: 2, 3, 7; screw connection terminal blocks

D-SUB connector, 9-pos. female connector, two 35° cable entries to one terminal block row, bus system: CAN, CANopen®, SafetyBUS p up to 1 Mbps, termination resistor can be switched on via slide switch, pin assignment: 2, 3, 7; screw connection terminal blocks

D-SUB connector, 9-pos. female connector, two cable entries < 35°, bus system: CANopen, FIP, pin assignment: 2, 3, 6, 7, 8, 9 to two screw connection terminal blocks