PBS2-RB010SG1SSDNMA0Z - 6073951

Features
Medium Liquid, gaseous
Pressure type Gauge pressure
Pressure unit bar
Measuring range

0 bar ... 10 bar

0 psi ... 145 psi
Process temperature –20 °C ... +85 °C
Maximum ohmic load RA

4 mA ... 20 mA (RA ≤ 0.5 kOhm)

0 V ... 10 V, 3-wire (RA > 10 kOhm)
Zero point adjustment Max. + 3 % of span
Output signal IO-Link/PNP/NPN + 4 mA ... 20 mA / 0 V ... 10 V
Rotatable housing

Display against housing with electrical connection: 330 °

Housing against process connection: 320 °
Display

14-Segment LED, red, 4-digit, character height 9 mm, can be rotated electronically by 180°

Update: 1,000, 500, 200, 100 ms (adjustable)

Mechanics/electronics
Process connection G ¼ A according to DIN 3852-E
Wetted parts

Pressure connection: stainless steel 316L

Pressure sensor: stainless steel 316L (for measurement ranges from 0 bar ... 10 bar rel stainless steel 13-8 PH)
Internal transmission fluid Silicone oil (only with pressure ranges < 0 bar ... 10 bar and ≤ 0 bar abs ... 25 bar abs)
Pressure port 3.5 mm, Standard
Housing material Lower body: stainless steel 304, Plastic head: PC + ABS, Buttons: TPE-E, Display window: PC
Connection type Round connector M12 x 1, 4-pin, IP67
Supply voltage 15 V DC ... 35 V DC
Power consumption

45 mA (for configurations without analog output signal)

70 mA (for configurations with analog output signal)
Total current consumption Max. 600 mA (including switching current)
Electrical safety

Protection class: III

Overvoltage protection: 40 V DC

Short-circuit protection: QA, Q1, Q2 towards M

Reverse polarity protection: L+ to M
Isolation voltage 500 V DC
CE-conformity EMC Directive: 2014/30 / EU (EN 61326-1:2013; EN 61326-2-3:2013), Pressure equipment directive: 2014/68 / EU, Hazardous materials (RoHS): 2011/65 / EU (EN 50581:2012)
Weight sensor Approx. 220 g
Seal NBR seal installed, FPM/FKM seal included
Enclosure rating IP67 / IP67
Protection class III ✔
MTTF 104 years

Performance
Non-linearity ≤ ± 0.25 %, of span (Best Fit Straight Line, BFSL) according to IEC 61298-2
Accuracy ≤ ± 0.5 % of the span
Setting accuracy of switching outputs ≤ ± 0.5 % of span
Response time ≤ 5 ms
Long-term drift/one-year stability

≤ ± 0.1 % of the span according to IEC 61298-2

≤ 0.2 % of the span According to IEC 61298-2 for measuring range ≤ 0.6 bar or flush-mounted membrane (0 psi ... 10 psi)
Temperature coefficient in rated temperature range Average TC of the zero point: ≤± 0.16% of the span / 10 K, Average TC of the span ≤± 0.16% of the span / 10 K
Rated temperature range 0 °C ... +80 °C
Service life Minimum 100 Mio. load cycles

Ambient data
Ambient temperature –20 °C ... +80 °C
Storage temperature –20 °C ... +70 °C
Relative humidity ≤ 75 %
Shock load 50 g, 6 ms according to IEC 60068-2-27 (mechanical shock)
Vibration load 20 g, 10 Hz ... 2,000 Hz (IEC 60068-2-6, at resonance)