IN40-E0101K - 6027388

Features
Sensor principle Inductive
Number of safe outputs 2
Switching delay from state change Max. 50 ms 1)
Enable zone 10 mm ... 15 mm 2)
Safe switch off distance Sar 30 mm 2)
Actuation directions 5
Active sensor surfaces 1
Monitoring time minimum dwell time ≥ 0.2 s
1) During this time the output is switched off (Logical “0”), see response range.
2) Dependent on material. The indicated values refer to steel ST37.

Safety-related parameters
Safety integrity level SIL3 (IEC 61508)
Category Category 3 (EN ISO 13849)
Performance level PL e (EN ISO 13849)
PFHD (mean probability of a dangerous failure per hour) 1.0 x 10-8
TM (mission time)

10 years (EN ISO 13849) 1)

20 years 2)
Type Type 3 (EN ISO 14119)
Actuator coding level Uncoded (EN ISO 14119)
Classification in compliance with IEC/EN 60947-5-3 PDF-M
1) At –25 °C ... +70 °C and 5 % ... 95 % relative air humidity.
2) At +10 °C ... +40 °C and 5 % ... 70 % relative air humidity.

Functions
Safe series connection With Flexi Loop (with diagnostics)

Interfaces
Connection type Plug connector, M12, 4-pin
Power indication ✔
Status display ✔

Electrical data
Protection class III (EN 50178)
Supply voltage Vs 24 V DC (19.2 V DC ... 30 V DC)
Power consumption 15 mA
Type of output Self-monitoring semiconductor outputs (OSSDs)

Mechanical data
Design Rectangular
Weight 0.22 kg
Material
Housing Zinc die cast (housing), PPE (cover)
Installation type Non-flush

Ambient data
Enclosure rating IP67 (IEC 60529)
Ambient operating temperature –25 °C ... +70 °C
Storage temperature –25 °C ... +70 °C
Vibration resistance 10 Hz ... 55 Hz, 1 mm (EN 60947-5-3)
Shock resistance 30 g, 11 ms (EN 60947-5-3)