SUBCON-PLUS-CAN/AX-2306566
D-SUB connector, 9-pos. female connector, axial version with two cable entries, bus system: CAN, CANopen, SafetyBUS p; pin assignment: 2, 3, 7; screw connection terminal blocks
Terms and Conditions
30-day money-back guarantee
Shipping: Contact us info@aarkautomation.com
documentation. Our General Terms of Use for Downloads are valid.
D-SUB connector, 9-pos. female connector, axial version with two cable entries, bus system:
CAN, CANopen, SafetyBUS p; pin assignment: 2, 3, 7; screw connection terminal blocks
Product Description
The SUBCON-PLUS-CAN/... D-SUB series is specifically designed for use in CAN systems. Under field conditions, it enables the quick
and easy connection of the incoming and outgoing bus line. The terminating resistor is already integrated in all versions. It can be connected
externally by means of a slide switch. At the same time, the outgoing bus segment is switched off. This makes it easy to start up segment by
segment while incorrect terminations are avoided.
Your advantages
Separate terminal blocks for bus cables•
Segment-by-segment startup•
High transmission speed•
Assembly under field conditions•
Flexibility in terms of cable entry selection•
High level of EMC•
Suitable for bus cables according to CiA Draft Recommendation 303-1 with an outside diameter of 8 mm•
Termination resistor can be connected•
D-SUB bus connector - SUBCON-PLUS-CAN/AX
2306566
https://www.phoenixcontact.com/in/products/2306566
Jul 2, 2022, 4:36 AM Page 1 (12)
Commercial Data
Item number 2306566
Packing unit 1 pc
Minimum order quantity 1 pc
Sales Key DNC
Product Key DNC541
Catalog Page Page 449 (C-6-2019)
GTIN 4017918962906
Weight per Piece (including packing) 53.9 g
Weight per Piece (excluding packing) 38.8 g
Customs tariff number 85366990
Country of origin DE
D-SUB bus connector - SUBCON-PLUS-CAN/AX
2306566
https://www.phoenixcontact.com/in/products/2306566
Jul 2, 2022, 4:36 AM Page 2 (12)
Technical Data
Notes
Utilization restriction
CCCex note Use in potentially explosive areas is not permitted in China.
Product properties
Product type Data plug
6706 Years (SN 29500 standard, temperature 25°C, operating
cycle 21%)
1817 Years (SN 29500 standard, temperature 40°C, operating
cycle 34.25%)
MTTF
155 Years (SN 29500 standard, temperature 40°C, operating
cycle 100%)
Pin assignment 2, 3, 7
Electrical properties
Nominal voltage UN 5 V
Nominal current IN 100 mA
Connection data
D-SUB connection
Connection method D-SUB socket
D-SUB connection
Connection method Screw connection
Stripping length 5 mm
Conductor cross section solid min. 0.14 mm²
Conductor cross section solid max. 0.5 mm²
Conductor cross section flexible min. 0.14 mm²
Conductor cross section flexible max. 0.5 mm²
Conductor cross section AWG min. 26
Conductor cross section AWG max. 20
Interfaces
Bus system CAN, CANopen, SafetyBus-P
CAN
CANopen®
Signal
SafetyBUS p
Dimensions
D-SUB bus connector - SUBCON-PLUS-CAN/AX
2306566
https://www.phoenixcontact.com/in/products/2306566
Jul 2, 2022, 4:36 AM Page 3 (12)
Dimensional drawing
Width 17 mm
Height 31.5 mm
Length 58.2 mm
External dimensions
External diameter min. 7.6 mm
External diameter max. 8.4 mm
Material specifications
Housing material ABS, metal-plated
Connector
Insertion/withdrawal cycles > 200
Environmental and real-life conditions
Ambient conditions
Degree of protection IP30
Ambient temperature (operation) -20 °C ... 75 °C
Ambient temperature (storage/transport) -25 °C ... 80 °C
Altitude ≤ 5000 m (For restrictions, see the manufacturer's declaration for
altitude operation)
Permissible humidity (operation) 10 % ... 95 % (non-condensing)
Permissible humidity (storage/transport) 5 % ... 95 % (non-condensing)
Approval data
EAC
Identification EAC
EAC
Identification
This is a preview of the recently viewed products by the user.
Once the user has seen at least one product this snippet will be visible.
Once the user has seen at least one product this snippet will be visible.